Got Questions? We’ve Got Answers.

In many cases, no but it depends on where the tree is located and whether it’s protected.

Permits are typically required if the tree is near a creek or lake, on a steep slope, or in a designated protected area.

For most standard residential properties outside those areas, you can remove a tree without a permit. If a permit is required, we will let you know during our quote.

Stump grinding typically goes 6–12 inches below ground level, which is deep enough to remove the visible stump and allow for grass or surface landscaping.

If you have specific plans, such as replanting or installing something in that exact location, the stump can be ground deeper if needed. However, deeper grinding may require additional time and may not fully remove all structural roots.

For most homeowners, standard grinding depth is sufficient to reclaim the area and eliminate the visible stump.

There isn’t a one-size-fits-all answer, but in general, only a limited portion of the canopy should be removed at one time to avoid over-stressing the tree.

The amount depends on the species, age, health, and structure. Younger, healthy trees can often tolerate more adjustment, while mature trees require a more conservative approach.

Rather than focusing on a percentage, the priority is removing the right branches, those that are dead, poorly attached, crossing, or creating imbalance, while maintaining the tree’s natural structure.

Good pruning is less about how much is removed, and more about what is removed and why.

The most important thing is to stay clear and keep others away. A fallen tree can still shift, and branches or sections may be under pressure.

If power lines are involved, or even close, treat the entire area as live and dangerous. Contact the utility company first and wait until they confirm it’s safe before anyone approaches. Never attempt to cut or move the tree yourself in these situations.

Once the area is safe, the removal needs to be approached carefully. Trees on structures are rarely stable. They often need to be taken apart in sections, relieving weight gradually so the structure isn’t damaged further during removal.

Response time depends on how urgent the situation is and how widespread the damage is at the time. During storms or high-wind events, multiple calls often come in at once, so priority is given to situations involving immediate risk to people or structures.

When we arrive, the first step is not cutting. it’s assessing. We look at how the tree is sitting, where the weight is, what’s under tension, and what could move unexpectedly. From there, a plan is made to remove the tree in a controlled sequence.

Additionally, working at night can be too dangerous to perform the removal so generally it's best to wait for first light so we can properly assess the damage, the situation and create a plan.

Emergency work is rarely straightforward. Taking a few extra minutes to assess properly can prevent additional damage or injury.

Yes. Trees often show symptoms long before the real cause is obvious, and the visible issue is not always the root problem.

A tree may appear unhealthy because of thinning foliage, dead branch tips, sparse leaf growth, discolored leaves, bark issues, poor annual growth, or sections of the canopy declining. Those symptoms can come from many different causes, including drought stress, root disturbance, poor soil conditions, improper planting depth, restricted growing space, compaction, disease pressure, insect activity, previous pruning damage, or natural decline related to age and species.

During a consultation, the goal is to step back and look at the entire context. That means evaluating the tree itself, but also the site conditions around it. Has the grade changed? Has there been trenching or construction nearby? Is water collecting around the base, or is the tree planted in a site that dries out too quickly? Is it competing heavily with surrounding trees? Has it outgrown the space and become stressed by repeated cutting?

Not every struggling tree can be restored, but many can be improved if the underlying issue is identified early enough. In some cases, the right recommendation may be pruning, mulching, soil improvement, watering changes, or simply avoiding further disturbance. In other cases, the consultation may confirm that decline is advanced and that replacement planning is the more practical path. Either way, the value is in understanding the cause rather than guessing based only on symptoms.

Some signs are obvious, but many are not.

Clear warning signs include large dead branches, visible cracks in the trunk, a tree that has recently started leaning, exposed or damaged roots, or sections of the canopy dying back. Trees that have been damaged by wind, heavy snow, or construction are also higher risk.

However, many structural issues develop slowly and aren’t easy to spot without experience. Weak branch attachments, internal decay, poor growth patterns, or imbalanced weight distribution can all lead to failure even when the tree still looks “healthy” from a distance.

If something about the tree doesn’t look right, or it’s positioned where failure would cause damage, it’s worth having it assessed before it becomes an emergency.

Tree failure is usually the result of structure, condition, and environment working together, not just one issue.

A tree is more likely to fail if it has:

• Poor branch structure or weak attachment points
• Excessive weight at the ends of limbs
• Internal decay or hollow sections
• Root damage from excavation, compaction, or erosion
• Leaning caused by shifting soil or root instability

External factors also play a role. In the Okanagan, wind, heavy snow load, and dry conditions can all stress trees in different ways. A tree that has adapted to one condition may become unstable when those conditions change suddenly.

The assessment looks at all of these factors together to understand not just the current condition, but how the tree is likely to behave.

Tree cabling and bracing are support systems used to reduce the risk of structural failure in trees that have weaknesses but are still worth preserving.

Cabling typically involves installing flexible steel cables high in the canopy to limit excessive movement between major limbs or stems. Bracing, on the other hand, uses rigid rods installed through weaker unions to provide additional structural support where splitting is a concern.

These systems are most often used on trees with multiple stems, weak branch attachments, heavy extended limbs, or trees that have developed structural issues over time but are otherwise healthy. The goal is not to “fix” the tree, but to reduce the likelihood of failure and extend its safe lifespan.

When installed properly, the impact on the tree is controlled and intentional.

Bracing rods do require drilling through the wood, but they are placed in a way that stabilizes the structure and allows the tree to continue functioning normally. Cabling systems are installed to support movement without restricting the tree completely.

In most cases, the benefit of reducing the risk of failure outweighs the minor impact of installation, especially for mature or high-value trees that would otherwise be at risk.

On larger properties, FireSmart becomes more about managing fuel load and how fire could move across the landscape, rather than focusing only on the immediate area around the home.

This may involve:

• Thinning dense stands of trees
• Creating spacing to break up continuous canopy
• Managing underbrush and ground fuels
• Maintaining access routes for emergency response

In the Okanagan, where many properties are on slopes or surrounded by natural vegetation, how fire moves uphill, how wind travels through the property, and how vegetation is layered all become important factors.

The goal is to slow fire progression and reduce intensity before it reaches structures.